Crystal clear water the easy way

Clean and Clear® Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.

An Eco Select™ Choice: Water flows very efficiently through Clean and Clear® Plus Filters filters allowing the use of smaller pumps or lower pump speeds to minimize energy use. And when consumers rinse cartridges rather than backwash, they can significantly reduce water use, too.

Features

• NSF listed
• Superior strength
• Large filter area for increased dirt capacity
• 1-1/2 in., 100% drain clean-out port
• Continuous High Flow™ internal air relief*
• Base and plumbing kits now available
• Injection molded tank
• Balanced hydraulic flow
• Tension Control™ clamp
• 100% factory tested
• Black bulkhead unions
• High Flow manual air relief valve

Product Specifications

CLEAN & CLEAR PLUS FILTERS
			Flow Rate		Turnover Capacity (In Gallons)
Product	Model	Effective Filtration Area (Sq. Ft.)	GPM Res.	GPM Comm.	8 Hour	10 Hour	12 Hour	Carton Qty	Carton Wt (Lbs)
160310	CCP240	240	90	90	43200	54000	64800	1
160340	CCP320 1	320	120	120	57600	72000	86400	1
160301	CCP420 1	420	150	150	72000	90000	108000	1
160332	CCP520 1	520	150	150	72000	90000	108000	1

Certifications

Note: Actual system flow will depend on plumbing size and other system components.
Note: Pentair Pool Products does not recommend flow rates above 150 GPM.
*Integrated Continuous High Flow internal air relief is operational only when there is unobstructed flow in the circulating system.